Shredder and Crusher

Introduction of DYSSG Series Pipe Shredder and Crusher

Our DYSSG series shredder can be used for shredding HDPE, PP and PVC pipes with a Maximum diameter of 1600mm. Pipes with the length of 3000-6000mm can be directly shredded without pre-cut. The rotation speed of shredder is stable and slow. Pipes are put into the horizontal feeding trough, the feeding trough is automatically closed and the pipes are pushed to the main shaft and blades by hydraulic propulsion for shredding. The shredded material is sent into the crusher by a conveyor for secondary thin crushing until getting the required flake size.

The main advantage of the DYSSG series shredders is that it saves a lot of labor of cutting pipes and sawing waste. The shredder is energy saving, low consumption, safety and high efficient. The whole system is controlled by the PLC centralized control system.

Technical parameter of DYSSG Pipe Shredder and Crusher

Introduction of DYSSZ Series Heavy Single Shaft Shredder

DYSSZ series heavy single shaft shredder can shred waste plastic which is hard to shredding with high capacity. It can be used to shred all kinds of plastic solid block, waste wood, waste paper and cardboard, electronic products, rubber products. The representative recycling products include refrigerator shell, lump, pallets, packing material waste, hollow barrel, petrol tank and pipe and film, etc. It can be designed as upper opening or side opening according to different feeding methods.

Technical parameter of DYSSZ Series Heavy Single Shaft Shredder

Introduction of DYSS Series Small Single Shaft Shredder

DYSS small single shaft shredder is a widely used shredding equipment, perfect design can meet the waste recycling requirements of various industries. It is suitable for a wide variety of plastic, such as lump block materials, pipes, woven bags, and a variety of waste cables, wood, waste paper and electronic waste.

According to the plastic produce and the next needs to choose the appropriate mesh aperture to determine the size of the shredded material, the shredded material can be directly recycled or further finely crushed.

Technical parameter of DYSS Series Small Single Shaft Shredder

Introduction of Two-Shaft Shredder

Our new series of two-shaft shredder has the features of low noise, low energy consumption and high output. It reflects the superiority of low speed and large torque cutting design. This series of shredders is particularly suitable for the crushing of large-sized plastic materials. After being shredded, the bulk density of the material can be increased, thereby reducing transportation costs. In addition, the material can be further processed after shredding, such as material separation, washing and pelletizing.

Technical parameter of Two-Shaft Shredder

Introduction of PVC Profile and WPC Product Crusher

Traditional crushers have certain difficulties in crushing plastics, profiles and wood-plastic profiles. Usually, larger crushing chambers are required to crush and recycle larger quantities of materials. For this reason, We specially designed the DYPS-X series crusher. The feeding hopper, which is almost parallel to the ground, makes feeding of longer materials extremely simple and convenient. Because the rotor of the machine can automatically grasp the material to-be-broken, there is no material blockage.

Technical parameter of PVC Profile and WPC Product Crusher