What Should be Paid Attention to in the Application of Sheet Extruder?

Precaution of Using Plastic Sheet Machine

1. Before starting the machine, first check the part of household appliances and mechanical equipment of the extruder equipment, and make sure it is accurate before starting the plastic sheet machine for manufacturing.

2. Preparation before manufacturing: actual operators should wear protective equipment to prevent burns. Heat the roller to the specified temperature according to the processing technology. Check the water resources and fill the silo with oil.

3. Start-up manufacturing: the actual operators should pay attention to accurately measure the thickness and total width of the sheet anytime and anywhere, and immediately adjust the injection rate and roll spacing to ensure that the sheet is even in thickness and thickness, and no surface scratches, bumps and uneven trimming are allowed.

4. Pay attention to the same size and smooth and neat surface when coiling.

5. In case of common failures of machinery and equipment in the whole operation process, the machine should be shut down immediately and the equipment maintenance personnel should be notified for repair.

6. Do a good job in all kinds of manufacturing records and hand-over records.

7. After the work is finished, clean up the machinery and equipment, cut off the power, and clean up the environmental sanitation on the spot.

Daily Maintenance of Plastic Sheet Extruder

The extruder is mainly composed of shell, engine, tail rudder and soft starter, each of which matches the different process flow of overall plastic granulation. In the case of maintenance, there are several aspects that must be paid attention to:

1. Clean it up at ordinary times. Cleaning is necessary at ordinary times. After several times of operation, some sediment will inevitably appear in the equipment. If it is not cleaned immediately, the service life of grinding will be reduced.

2. Check the internal thermoforming machine on time.

3. In case of sudden power failure and power off, the switching power supply should be disconnected first, and some actual operations should be terminated, and then the maintenance and other work after dialing the phone afterwards should be started.

If you need high-quality plastic sheet extruders, jwell extruder is an excellent choice.

Resources

Video

Catalog Download

FAQ

Blog

Products

Pipe Extrusion Line

 